Eneo KBD-NSC-100 Specifications

1Installation and Operating ManualNetwork System Controller with 3-Axis Joystick and Jog ShuttleKBD-NSC-100

102. InstallationA device should be registered on the network keyboard properly for control by a network keyboard. The Basic mode and Advanced mode a

112.2 DVR System RegistrationYou can register a DVR to control via RS-485 or network connection. In the Basic mode, the DVR’s system ID set in each D

125. Go to the following menus: Setup –> Remote Setup –> Device –> Setup 5.1. Click Digital Video Recorder in the device list, an

132.3 MMX System RegistrationYou can register MMXs to control via network connection. The MMX can be controlled only in the Advanced mode by using th

14 5.3. Click the Digital Video Recorder pull-down menu in the device list, and then the registered DVR’s pull-down menu. A list of monitors

15 6.3. Click a monitor in the list, and then the Edit button. Set up the monitor ID. The network keyboard assigns the ID automatically when

163. OperationYou can control devices via RS-485 and network connection by using the network keyboard. The devices should be registered on the networ

17Locking ButtonsPressing the and buttons together locks the buttons of the network keyboard. You can set up the buttons to be locked by usin

183.3 DVR System ControlYou can control DVRs and PTZ cameras connected to the DVRs via RS-485 or network connection. It is required to log in a user

19Example II (Advanced Mode)Cameras 1 ~ 16DVRVideo Out1. Press the monitor ID.2. Press the button. You can control the DVR that the monitor is c

2ContentsSafety Instructions / Maintenance ...

20Controlling Camera on Specific MonitorCameras 1 ~ 16DVRSpot MMXMain OutLoop OutVideo In Spot OutSpot MMXMain OutVideo In1. Press the monitor ID.2.

214. Press the button. 5. Press the camera ID.6. Press the button. Video from the camera is displayed in the selected pane, and you can con

22Controlling DVR on Specific Monitor1. Press the monitor ID.2. Press the button. You can control the MMX that the monitor is connected by using

231. Press the main monitor ID.2. Press the button. You can control the MMX that the monitor is connected by using the device control buttons.3.

244. LCD Menu ConfigurationThe LCD menu on the LCD screen allows you to set up the system or register devices to control in the Basic mode. The system

254.3 Setup MenuSystemGeneral VersionDisplays the software version.PasswordSets up the Admin password or User password (max. four digit numbers). Ent

265. Remote ConfigurationThe Remote Setup allows you to change all settings of the network keyboard. Run the INIT program, select a network keyboard t

27Button• Beep: Check the box to beep when pressing the buttons of the network keyboard.• Lock: The buttons of the network keyboard will be locked wh

28IP AddressYou can change the network settings and set up DVRNS information.5.2 Network• Type: Select the type of network configuration. Ask your ne

295.3 DeviceGeneralYou can set up the setup mode and register PTZ cameras, network cameras, network video transmitters, network receivers, DVRs and M

3Safety Instructions / Maintenance• Read these safety instructions and the operation manual first before you install and commission the unit. • Keep

30General – Advanced ModeYou can control devices via network and RS-485 connections when registering the devices in the Advanced mode.• Scan, Add, Ed

31• Edit: Select a device or the monitor and camera connected to the device in the list and click the button to edit the setting.Monitor– ID: The ne

32– ID: Assign a unique ID from 1 to 100 to the macro. When giving a ‘macro ID’ –> command, the network keyboard performs the actions re

337. Technical SpecificationsType KBD-NSC-100Art. No. 74746Operation modeSingle operationAudio inputs1 (Microphone)Audio output1x Loudspeaker (mono/st

34APPENDIX 1RS-485 Connector Pin OutsRS485 PTZ ConnectorRS485 DVR ConnectorMaster Unit Slave Unit + –> to –> TX+/RX+ – –> to –&g

35APPENDIX 2ButtonsNOTE: In the operation explanation for each button, „ –> ” indicates that the buttons are pressed sequentially, and „&” ind

36PTZ Camera ControlNOTE: Depending on the PTZ camera specifications, some features may not work. Refer to the PTZ camera manufacturer’s manual for d

37Device ControlNOTE: The buttons work only when the device to control is selected and each function of the buttons is supported in the device. Re

38Button Designation OperationEnable Speaker / Mic• : Receives audio from the remote site through the speaker when controlling a camera. Pressing

39APPENDIX 3PTZ Camera Model NumberNo. Model No. Model1IRX-100 (IDIS)2WJ-SX550A (Panasonic)3SpeedDome (Eneo)4D-protocol (Pelco)5Receiver/MPU (Sungjin)

41.2 Typical ApplicationsPTZ Camera ControlYou can control PTZ cameras via RS-485 connection. Refer to Chapter 2 – Installation, 2.1 PTZ Camera Reg

40APPENDIX 4System Upgrade Error CodeWhen an error occurs during the software upgrade, refer to the following error code.No. Description No. Descripti

5DVR System Control via Network ConnectionYou can control DVRs and PTZ cameras connected to the DVRs via network connection. Refer to Chapter 2 – In

6MMX System ControlYou can control MMXs, DVRs connected to the MMX and PTZ cameras connected to the DVRs via network connection. Refer to Chapter 2 –

71.3 Rear PanelNo. Designation Details1Speaker Connect to an amplifier (Line-out). The network keyboard does not have amplified audio output, so you wi

81.4 Bottom PanelNo. Designation Details1Joystick Bracket Use to attach the joystick provided with the network keyboard body to the network keyboard

91.5 Top PanelNo. Designation Details1 Joystick Controls pan and tilt of a PTZ camera by using the stick or zoom of a PTZ camera by using the shuttle