Eneo GLS-2302H Operations Instructions

1Operating ManualNetwork Server, Video/Audio, 1 Channel, H.264, MPEG-4, MJPEGGLS-2302H

104. InstallationPlease follow the instructions and the diagram below to set up the system.NOTE: The Video Server is linked by its Video Out connect

116. In 5 to 10 seconds, a message reading „UPDATE PROCESSING” will show up on the screen on a blue back- ground; if not, please check out step

125.2 Configure your Video Server Network SettingsUpon connecting with the network hardware, you need to activate the network function and configure th

135.2.2 Set IP AddressYou need to set an IP address for the unit if the LAN unit isn’t connected to a DHCP server. Otherwise, please follow the instr

145.3 TCP/IP Communication SoftwareFollow the instructions below to install the TCP/IP communication program into your computer.1. Click Start, an

154. On the General tab, check if the Internet Protocol (TCP/IP) is included in the list. If the TCP/IP is included, please process section 5.

165.4 TCP/IP InstallationOn the General tab of the Connection Properties, under „This connection uses the following items”, click Internet Protocol (

175.5 TCP/IP Configuration SettingClick Start –> Control Panel –> Network ConnectionsSelect Internet Protocol (TCP/IP), and then click Propertie

185.6 Connection TestingWith the previous settings, follow the instructions below to ensure whether you have established the connection successfully.

19If you receive a response as in the sample screen below, you have successfully made the connection.If you receive a response as in the sample screen

2BetriebsanleitungInstallation and Operating InstructionsMode d’emploiInstrukcja instalacji i obsługiwww.videor.comwww.eneo-security.com⇒

206. Operating Instructions for Image Software and NetworkTwo choices of software are available for linking up with the Video Server: (1) the Microso

216.1 Microsoft Internet Explorer6.1.1 Connecting the Video Server1. Start up the Microsoft Internet Explorer, and then follow the steps below to c

226.1.2 Live VideoThe Live Video from the Video Server is displayed on the home page when your PC is online with the Video Server. There are also ad

23The ActiveX viewer type:You can select from the available thumbnails for your option of taking a Snapshot, setting the Storage Folder, selecting the

24• Live Video: Click to go back to the device’s homepage.• Setup: Click to proceed to the advanced settings.• Logout: Click to close the window.6.

25The Video Server default setting is DHCP On. Use the DHCP protocol if the DHCP server is working in the LAN. The Video Server will obtain an IP addr

26Step 3:If you have a Dynamic DNS account and would like the Video Server to update your IP address automatically, select Enable and enter your host

27Step 6:If you have selected DHCP, you will see a summary of your Video Server’s settings. Please note down all this information as you will need it

286.1.3.2 Change Video SettingPlease follow the steps below to change the video setting through the network as necessary. A preview of the image will

29Description of function keys:MirrorThe mirror stores the images reflected by it so it can be used for surveillance or to simply take your own picture

3Contents 1. Safety Instructions / Maintenance ...

30• The Audio and Video setting page1. Click on the Audio and Video button to enter the Audio and video page to set the details of the device.

31Description of function keys:ModeChoose the video format from „JPEG”, „MPEG4” or “H.264”. It can JPEG, MPEG4 or H.264. In JPEG mode, the video frame

321. Click the right mouse button on the video control to show the pop-menu.2. Press the left mouse button, drag and drop to set the privacy are

33Description of function keys:DHCPIf you have a DHCP server running on your network and would like a dynamic IP address to be updated to your Video S

34Description of function keys:PPPoE SettingIf you use the Video Server to connect directly to the Internet, you will need to enter the username and p

35Description of function keys:HTTP PortHTTP ports allow you to connect to the Video Server via a standard web browser. This port can be set to a numb

362. Enter the „Maximum Upload Bandwidth” and the „Maximum Download Bandwidth”.3. Click on the Submit button to submit the new setting.Descripti

37Description of function keys:Enable DDNS FunctionCheckmark to activate the functionDNSThe Domain Name System is an Internet service that translates

385. The Certification Information will show below.6. Click „CSR Property” to see the Certificate Signing Request information.7. Click „Certific

39• Change the Network Settings – Access ListThe „Network” page has, on its upper left, the „Access List” icon. Please follow the steps below to chan

41. Safety Instructions / Maintenance• Read these safety instructions and the operation manual first before you install and commission the unit. • K

40NOTE: If there are any conflicts between the range of the Allow List and the range of the Deny List, the Access List within the range of the Deny

41Description of function keys:Time ZoneSelect your time zone from the drop-down menu.Enable Daylight SavingSelect this to enable the daylight saving

422. Select the active state of the Digital Input 1 from the drop-down list.3. Select the active state of the Digital Input 2 from the drop-down

43Data BitsEither 7 or 8. It is a measurement of the actual data bits in a transmission. In default, the value is 8.Parity BitChoose from No, Even, a

44• Change the System Setting – UsersYou may modify the name and administrator’s password of your Video Server, as well as add and manage the user ac

45• Change the System Setting – MaintenancePlease follow the steps below to change the system setting through the network as necessary.Click on the M

46• Change the System Setting – Update FirmwarePlease follow the steps below to update the firmware through the network as necessary.1. Click on th

476.1.3.5 Change the Application SettingPlease follow the steps below to change the application setting through the network as necessary.• Change th

48• Change the Application Setting – Motion DetectionPlease follow the steps below to enable changes in the motion detection function of the alarm th

49• Change the Application Setting – EventIn this section, you can configure and schedule the recording setting for your Video Server.Click on „Add” t

52. Product Features2.1 Product IntroductionThe Video Server Encoder is a versatile solution that allows you to make the most of your existing analo

50Server:Click on the Add button in the Server column to enter the „Server” setting page.1. Enter the Server name, the unique name for a server. Fo

51Server settings:(1) Click Add under the Sever column on Event Settings page to open the Server setting page. On this page, you can specify wh

52 SD card: Select to send the media files to an SD card when a trigger is activated. (a) Insert your SD card first. (b) To verify if t

533. Set the details of the Video Clip. „Source„: Select the video source. „Pre-event recording„: The interval of pre-event recording in seco

54 (d) Maximum file size: Specify the maximum file size allowed. (e) File Name Prefix: Enter the text that will be appended to the front of t

55Event:Click on the Add button in the Event column to enter the „Event” setting page.1. Enter the Event name. Checkmark the „Enable this event” bo

56Event settings:(1) Click Add under the Event column on Event Settings page to open the Event setting page. On this page, you can arrange three

57Recording:Click on the Add button in the Recording column to enter the „Recording” setting page.1. Enter the Recording entry name. Checkmark the

58(6) Specify the recording schedule and the recording settings. Recording Schedule: (a) Select the days of the week. (b) Set the r

592. The SD Card page contains two image modes, the Video and the Picture.3. Click „Video” or „ Picture” to enter its sub year-month folder.4.

6FACTORY DEFAULT • IP Address: 192.168.1.168 • Password: 99992.2 General Description• 1 channel video/audio server for LAN/WAN• Resolution 72

60• The System LogThis page displays the log information of your Video Server.1. Click on the „Device info” button of the Status page to enter the

616.1.3.8 PPPoE & DDNSUsing the PPPoE1. Install the XDSL software (obtained from your ISP dealer) in your PC.2. Search your Video Server‘s

627. Advanced OperationQuestion 1:How to view the live images of the Video Server via the Microsoft Internet Explorer on the Desktop PCs or the lapt

63Question 4:How do I set up the motion detection area and its sensitivity ? • Set up the motion detection 1. Activate the Web browser and key in t

64Question 6:How to add or modify the users and their authorities of using the Video Server ?• Entering the setting page 1. Click the System button

658. SpecificationsType GLS-2302HArt. No. 92708Serieseneo GLVideo encoding/decoding720x576 Full D1, 352x288 CIF, 176x144 QCIF. GOP structure: I (MP=0)

66Optional AccessoriesThe optional accessories currently available can be found on our Homepages: www.videor.com and www.eneo-security.comFirmware up

679. Dimensional DrawingsDimensions: mm948034

68APPENDIX 1How to run the Video Server UPnPThe most troublesome issue when you setup a Video Server is that you have no idea what the IP address of t

691. Check the IP class of your PCIn most case Microsoft Windows XP® will assign an IP address, 169.254.*.*, automatically with a subnet mask, 255.25

73. Description of the Front/Rear View3.1 Front Panel3.2 Rear Panel1. Plug Inlet: A DC 12V inlet that connects to an external power supply.2.

70Step 3: Click the Properties tab in the Network Connections dialog box.Step 4: When the Local Area Connection Properties dialog box shows up, cho

71Step 5: In the Internet Protocol (TCP/IP) Properties dialog box, choose Use the following IP Address to indicate that you do not wish to use

722. Install UPnP Packets As described before, Microsoft Windows XP® doesn’t start the UPnP service by default; however, we have to install some pack

73Step 3: Check the Network Services in the Windows Component Wizard dialog box, and then click Details...Step 4: Check UPnP User Interface, and

74Step 5: When the original Network Component Wizard dialog box returns, click Next.Step 6: After about one minute the UPnP installation will be d

753. Turn on Services After installation, we should turn on the relative services to start the UPnP protocol. The following procedures will teach you

76Step 3: Click the Services icon in the Administrative Tools dialog box.Step 4: When the Services dialog box shows up, double click the SSDP Disc

77Step 5: Choose Automatic in the Startup type, and click OK to start it.Step 6: When the Services dialog box appears again, double click the Univ

78Step 7: Choose Automatic in the Startup type, press the Start button, and click OK to start it. Step 8: Restart your system. 4. Scan Video Serv

79APPENDIX 2Register as a DDNS MemberThe DDNS (dynamic domain name system) is a function which is provided by an American company. Please refer to www

83.3 The DI/DO SchematicDI Receives signals from a reed switch, vibration sensor, or any other external security deviceDOConnects to an alarm or buzz

80Set up the DDNSAfter creating the account successfully, please enter your user name and password in the upper right-hand corner of the main page to

81Click „My Services” to enter the service page. Please click the „Add Host Service” item which is below the „My Hosts” item, as shown below.Click „A

82All we have to set in this page is the „Hostname” item. The user can choose a Sub Hostname as s/he likes from the right-hand side of the Hostname’s

83APPENDIX 3MPEG4 Bit Rate Table for the Video Server1. When frame rate is higher than 15 frames/second (15 is not including):Highest High Medium Low

84APPENDIX 4PoE Installation MethodWARNING:Please follow the steps in this instruction carefully. Connecting these adapters incorrectly may result in

93.4 The USB FunctionBy connecting the Video Server board with a PC via the USB connector, the Video Server board can provide different functions. 1.