Eneo VKCD-1416C User Manual download pdf (Page 45)

NOTE 1 : You can choose BPS menu appropriate for keyboard protocol.

NOTE 2 : Although you change BAUD RATE or PROTOCOL menu,

the terms of change is not applied unless you select SAVE menu.

NOTE 3 : Do not power source down while saving

5. TROUBLESHOOTING AND MAINTENANCE

5.1 TROUBLESHOOTING

If problems occur, verify the installation of the camera with the instruction in this

manual and with other operating equipment.

Isolate the problem to the specific piece of equipment in the system and refer to

the equipment manual for further information.

PROBLEM

POSSIBLE SOLUTION

Nothing appears on the screen Are the power cord and line connection between

the camera and monitor made properly?

The image on the screen is dim.

Is the lens dirty?

If so, clean the lens with a soft, clean cloth.

The camera is not working

properly and the surface of the

camera case is hot.

Is the camera connected to the proper power?

The contrast on the screen is

too weak.

Adjust the contrast feature of the monitor.

Is the camera exposed to strong light?

If so, change the camera position.

5.2 MAINTENANCE

Preventive maintenance allows detection and correction of minor faults before they

become serious and cause equipment failure.

Every three-month, perform the following maintenance.

A. Inspect all connection cables for deterioration or other damage.

B. Clean components with a clean damp cloth.

C. Verify that all the mounting hardware is secure.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 72 73

No comments

Eneo VKCD-1416C User Manual Page 45